TIP #1: When using the PosaStart feature with the CobraMig 400P and 150-006 Cobramatic cabinet, leave the PosaStart toggle switch on the cabinet front panel in the "Off" position. It is not necessary to turn this switch to the "On" position since the CobraMig 400P software has been programmed to control the PosaStart feature when using this system.
TIP #2: If you would like to see a demonstration of the CobraMig 400P in person, just give the MK Products Sales department a call. Not only can we get a demonstration set up, in many cases, your existing Cobramatic equipment can be upgraded to accept the CobraMig 400P power supply.
|
